Rigid Brass extension are applicable where extensions can be mounted in a straight line with valve. Full Length Plunger Pin actuates core in existing Valve, and Metal Dust Cap With 02 Nos. of Lock Nuts are included on extension. Fits on 12.243 mm – 26 (0.482" – 26) Valve mouth threads.

Hand Bendable Valve Extension Ruggedly built, these extensions meet wheel conditions where a light weight, rigid, Yet Hand Bendable – to – shape type is desired. They have a spring Lined braided cover for protection, and Equipped with Valve Core, Metal Dust Cap and 02 Nos. of Lock Nuts. The Lead seal in the sealing nut is forced into the threads for a second seal, Positively Locking extension to Valve. They should be removed from valve and transferred to extension. Should be anchored to rim.

100 % (360°) Flexible Valve Extension Equipped with Valve Core, Metal Dust Cap and 02 Nos. of Lock Nuts. The Lead seal in the sealing nut is forced into the threads for a second seal, Positively Locking extension to Valve. They should be removed from valve and transferred to extension. Should be anchored to rim. Above Valves are assembled with valve core, metal dust cap with 02 nos. of Lock Nuts.

These valves are used on tyre tubes of Off – The – Road vehicles. The rubber base of the spud is cured with the tube and the valve is screwed on to the threaded portion of the spud. Assembly Contains Valve Core , Bridge Washer and Metal Dust Cap.

Have same features as swivel type valve except that it is a straight nonswivel type valve. The valve supplied with EME Metal Valve Based spud , Valve Core and Metal Dust Cap.

This spud fits on to 20.650 mm (0.813") tubeless rim hole by the clamp – in rubber g r omme t s e a l i n g method and is used in EME Valve Extensions and Valve Stems.

Screw in to a ½" NPT Tapped Hole in the Rim , Spud can be Replaced Without Dismounting the Tyre.

EME-403 Constructed of Stainless Steel bodies for use in High Pressure absorber unit, Hydrauic Pressure accumulators, Surge cylinders, Nitrogen Charging Units and High-Pressure Pneumatic system. Valves have ½" - 20 U.N.F. - 3A threads for connections to containers. EME - 403 Shock Struct Vlave for Operating Pressure to 3000 psi. confirms to AN - 6287 - 1.

EME - 404 Constructed of Stainless Steel bodies for use in High Pressure absorber unit, Hydraulic Pressure accumulators, Surge cylinders, Nitrogen Charging Units and High-Pressure Pneumatic system. Valves have ½" - 20 U.N.F. - 3A threads for connections to containers. EME - 404 High-Pressure inflating connection. Fits 305-32" thread size with 3/8" - 24 thread for 3/16" flare tube fitting meets MS336556E3. Has core depressor Pin and Copper sealing washer. for Maximum Working Pressure 3000 psi.

EME - 405 Constructed of Stainless Steel bodies for use in High Pressure absorber unit, Hydraulic Pressure accumulators, Surge cylinders, Nitrogen Charging Units and High-Pressure Pneumatic system. Valves have ½" - 20 U.N.F. - 3A threads for connections to containers. EME - 404 High-Pressure inflating connection. Fits 305-32" thread size with 1/8" NPT Male Connection. Has core depressor Pin, and Copper sealing washer for Maximum Working Pressure 3000 psi.

Spud is available with rubber base 114.00 mm ( 4.488") in Dia. And 12.700 mm (0.500") in Thickness at the Centre. Ready for attachment to convertible Large Bore Screw on type valves. Has 0.482" – 26 external threads.